News Center

Learn about the news of Nantong Moore's new materials and the fresh information of the industry.

Composite watchband touch fingers are what material?


Release time:

2023-02-08

When the contact fingers of the continuous connector with contact finger technical characteristics of the composite watchband are subjected to extrusion molding, the adjacent contact fingers collide with each other, and the bearing force of the contact fingers is uneven, resulting in unstable transmission current and endangering the service life of the continuous connector. Moreover, it transmits unstable current, which seriously affects the service life of the bandage connector. When the composite watchband touches the spring action of the finger-shaped torsion spring, the upper end of the cone-shaped frame is covered by the exposed torsion spring, and the clamping guide column gradually increases the aperture above the cone-shaped frame, especially the finger-tip torsion spring is pulled apart axially;

Composite watchband touch fingers are what material?

The contact fingers of the composite watchband can be determined to be a stainless steel plate. In general, this type of product it is made of stainless steel plate. In fact, it has the same advantages and disadvantages as the casing. Here to tell you about the composite strap touch fingers are made of what material? If you want to know, come and find out about it.

复合表带触指

Composite watchband touch refers to the integration of epoxy resin and zodiac, which is more conducive to the durability of the watchband! In fact, it is more expensive, exquisite workmanship, very luxurious. Applicable to other places such as jewelry. Steel watchband watchband: moderate price, full range. It is characterized by durability and firmness. In addition, its logo and care box, strap and back cover are made of 75% pure 4.5% silver and 20.5% copper. According to statistics, it has also been found that in the technical features, the contact fingers are connected in series to produce a ribbon connector, which is electrically connected on the circuit board of the power transmission and transformation project. When the contact fingers of the continuous connector with contact finger technical characteristics of the composite watchband are subjected to extrusion molding, the adjacent contact fingers collide with each other, and the bearing force of the contact fingers is uneven, resulting in unstable transmission current and endangering the service life of the continuous connector. The ribbon connector in the technical characteristics needs to be improved. If there is something you don't understand, you can dial our own cell phone at any time. There are also online customer service staff to entertain you, whether it is other problems can help you carefully to explain.


Composite watchband touch finger is also mainly aimed at the technical characteristics of the defects. The invention provides a composite watchband contact finger, watchband connector and production method, and solves the production process of the contact finger of the watchband connector with technical characteristics. Hit each other. And the bearing force of the contact finger is not uniform. Moreover, it transmits unstable current, which seriously affects the service life of the bandage connector. The touch finger of the composite wrist strap refers to the finger of the spring support of the connecting plate, the umbrella organization integrally formed by the four-link mechanism and the four support rods, and the lower connecting baffle block refers to the finger. There are four supports on the circle of the umbrella mechanism. During the use of the commodity, the surface of its conical structure actually forms an expanding surface layer for expanding the torsion spring of the finger head. The aperture at the left and right ends of the sound card rack is changed by guide cover, pressure bar and pressure bar. Naturally, these aspects also mainly refer to the torsional spring moving its designated position along the rising surface. When the spring of the finger-shaped torsion spring of the composite watchband is applied, during the process that the upper end of the cone-shaped frame is covered by the exposed torsion spring, the aperture above the cone-shaped frame is gradually increased by clamping the guide column, especially the finger-tip torsion spring is axially pulled apart. If the aperture below the cone-shaped frame is lower than the aperture above, the contact finger of the composite watchband moves downward along the spherical surface of the cone frame under its own elastic effect, and axially fold until it falls into the matching part of the valve-shaped probe on the precision positioning table.


Tag:

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

Related News


Moore New Materials

Enterprises engaged in the design, development and research of high-strength and high-conductivity alloy materials and electrical connection products.

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas