News Center
Learn about the news of Nantong Moore's new materials and the fresh information of the industry.
How to maintain the gas wall-mounted boiler
Release time:
At present, many families install gas wall-mounted boilers in the bathroom because it has a personalized adjustment of the bathroom temperature. However, for the gas wall-mounted boilers that we often use, do we all know how to maintain the gas wall-mounted boilers? Let us understand the maintenance methods of gas wall-mounted boilers. As the scale attached to the inner wall of the heat exchanger continues to thicken, the diameter of the heat exchanger tube will become smaller and smaller, and the water flow will become unsmooth, which not only increases the burden on the pump and the pump. It also reduces the heat exchange efficiency of the gas wall-mounted boiler. The main manifestations are the increase in gas wall-mounted boiler consumption, insufficient heating, hot and cold sanitary hot water and hot water reduction. If the heat exchange components of the gas wall-mounted boiler are finally maintained at such a high load state, the damage to the gas wall-mounted boiler will be very serious, especially the plate heat exchanger is more harmful. Users should pay special attention to the choice of the wall-mounted boiler brand. Most of the heaters we use are made of cast iron. The sand mold residue and other impurities in the radiator cannot be completely removed during the engineering installation; in addition, the water in the heating system is always closed and circulated, and the heating part of the gas wall-hung furnace has no filter, so that the corrosion residue in the heater and the pipeline The impurities of the water itself enter the heat, and the heater passes through the circulating pump of the gas wall-hung furnace again. This
Tag:
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Address
Room 101, Building 605, Dasheng Venture Park, No.99 West Beihai Road, Haimen City, Jiangsu Province, China
Mol
Supply Products
Copyright©Nantong Mol New Material Technology Co., Ltd.
