News Center

Learn about the news of Nantong Moore's new materials and the fresh information of the industry.

Copper alloy spring: manufacturing process of copper alloy spring


Release time:

2021-08-27

Copper alloy spring as an important component of industrial equipment, its use is very much, and the type of copper alloy spring is also more, the production method of copper alloy spring is the original handmade, but now has gradually embarked on the automation. With the increasing market demand for copper alloy springs, copper alloy spring manufacturers have more and more special equipment, which has increased the production of copper and gold springs and improved work efficiency. Next, I will share with you., More about the production process of copper alloy springs.

Copper alloy spring: manufacturing process of copper alloy spring

Copper alloy springAs an important component of industrial equipment, its use is very much, and there are many types of copper alloy springs. In the past, the production method of copper alloy springs was made by the original hand-made, but now it has gradually embarked on automation. With the increasing market demand for copper alloy springs, copper alloy spring manufacturers have more and more special equipment, which has increased the production of copper and gold springs and improved work efficiency. Next, I will share with you., More about the production process of copper alloy springs.

铜合金弹簧


InCopper alloy springThe cold-formed apartment needs automation to be made, and with the help of cold forming machine, it can use steel wire to form in the forming machine in one step within the range of 0.3mm to 14mm. Moreover, the development direction of the forming process equipment is gradually formed, which is mainly determined by the forming speed of the equipment, and the equipment parts after progress, his enhanced heat treatment effect and refinement have gradually improved the durability of the equipment. The cold dust type process uses a length sensor and a machine range finder to automatically stop the closed-loop control of the production process in the molding machine.
while inCopper alloy springThe thermoforming process in is capable of mass forming over a specification of 9mm to 20mm, and it can reach 17 pieces per minute. The thermoforming process of some large springs can be well controlled, but the appearance of the control is relatively small, the accuracy is relatively poor, and there is no automatic adjustment mechanism, so the molding process can be relatively low, so the appearance of the copper alloy spring oxidation and decarburization The degree and accuracy are also relatively low.
Copper alloy springControl the movement of machinery, such as valve springs in internal combustion engines, control springs in clutches, etc. Absorb vibration and impact energy, such as buffer springs under cars and trains, vibration absorbing springs in couplings, etc. The ratio of load to deformation of a copper alloy spring is called the spring stiffness. The greater the stiffness, the harder the spring. Spring is a kind of elastic element widely used in mechanical and electronic industries. The spring can produce large elastic deformation when loaded, which converts mechanical work or kinetic energy into deformation energy. After unloading, the deformation of the spring disappears and returns to its original state. The deformation energy is converted into mechanical work or kinetic energy.
The copper alloy spring is deformed under the action of external force, and the spring can be restored after the external force is removed. Many tools and equipment are using the nature of the spring to reset. For example, the hinges of many building doors are equipped with return springs. After people enter and exit, the door will automatically reset. People also use this function made of automatic umbrella, automatic pencil and other supplies, very convenient. In addition, various buttons and keys are also indispensable to the return spring.
The main products of Nantong Moore New Material Technology Co., Ltd. are GIL connector, beryllium cobalt copper, watchband contact finger, spring contact finger, special-shaped plum contact finger, composite watchband contact finger, charging pile current connector, chrome zirconium copper, copper alloy, copper alloy spring, etc. Nantong Moore New Material Technology Co., Ltd. is developed from its predecessor Nantong Moore Electric Co., Ltd., which is an enterprise specializing in the design, development and research of high-strength and high-conductivity alloy materials and electrical connection products. Companies in the industry has achieved a high degree of recognition and reputation of the majority of customers. The company in line with professional advanced, pioneering spirit, set up rigorous and pragmatic, the basic concept. To do a product, cast a boutique for the purpose of the enterprise, and give full play to the characteristics of flexible and diverse enterprises, intentions to serve every customer.




Tag:

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

Related News


Moore New Materials

Enterprises engaged in the design, development and research of high-strength and high-conductivity alloy materials and electrical connection products.

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas